Kerdi Line
KERDI-LINE is a low profile linear floor drain specifically designed for bonded waterproofing assemblies. KERDI-LINE can be installed adjacent to walls or at intermediate locations in showers, steam rooms, wet rooms, and other applications that require waterproofing and drainage..
The floor can be sloped on a single plane to KERDI-LINE, which enables the use of large-format tiles and creates interesting design opportunities.
KERDI-LINE is available in 3 attractive great designs:Closed-design, Square perforations, and - Frameless tileable.
For more information: www.schlutersystems.com
Kerdi Board
Schluter-KERDI-BOARD is a multifunctional tile substrate and building panel, which can also be used for creating bonded waterproofing assemblies with tile coverings. It consists of an extruded polystyrene foam panel, with a special reinforcement material on both sides and fleece webbing for effective anchoring in thin-set mortar.
For more information:www.schlutersystems.com
Kerdi
Schluter-Kerdi is a bonded waterproof membrane with limited crack-bridging capabilities. It is made of soft polyethylene, which is covered on both sides with a special fleece webbing to anchor the membrane in the thin-set mortar. Schluter-Kerdi was developed as a waterproofing membrane to be used in conjunction with ceramic and stone tile coverings. Tiles can be installed directly on Schluter-Kerdi using the thin-bed method. Other trowel-applied covering materials, such as plaster, can also be used.
For more information: www.schlutersystems.com
Ditra
Ceramic and stone tiles are durable, easy to maintain, and hygienic, representing the ideal surface coverings. However, today's lightweight construction methods can make the installation of hard surface coverings particularly challenging. In order to protect the integrity of the tile assembly, an underlayment that performs multiple functions is required.
Schluter-DITRA is a polyethylene membrane with a grid structure of square cavities, each cut back in a dovetail configuration, and an anchoring fleece laminated to its underside.
For more information: www.schlutersystems.com
Shower Kit
The Schluter-KERDI-SHOWER-KIT is an all inclusive package containing each of the components required to create a maintenance-free, watertight shower assembly without a mortar bed.
Schluter-KERDI-SHOWER-ST/-SC are prefabricated substrates, made of expanded polystyrene foam, for tiled shower bases in conjunction with Schluter-KERDI waterproofing membrane and Schluter-KERDI-DRAIN. Schluter-KERDI-SHOWER-ST is a prefabricated, sloped shower tray that is specifically designed to accept the Schluter-KERDI-DRAIN and Schluter-KERDI waterproofing membrane.
For more information: www.schlutersystems.com
Kerdi Drain
Schluter-KERDI-DRAIN is a floor drain specifically designed to allow connections to Schluter-KERDI or other load-bearing, bonded waterproof membranes, typically in shower applications. Bonded waterproof membranes represent the current state of technology and are increasingly used for ceramic tile and natural stone coverings. Schluter-KERDI is adhered to the drain's large, trapezoid-perforated bonding flange, which is covered with a fleece webbing, to form a waterproof connection at the top of the drain assembly.
Ditra Heat
The Schluter®-DITRA-HEAT-E-KIT is an all-inclusive package containing the DITRA-HEAT uncoupling membrane, DITRA-HEAT-E-HK heating cable, and either a DITRA-HEAT-E-RSD programmable or a DITRA-HEAT-E-RT touchscreen programmable thermostat.
For more information: www.schlutersystems.com
Niche
Schluter®-KERDI-BOARD-SN is a prefabricated shower niche made of KERDI-BOARD that can be installed in both KERDI and KERDI-BOARD wall assemblies
For more information: www.schlutersystems.com
Bench
Schluter®-KERDI-BOARD-SB is a prefabricated shower bench, made of KERDI-BOARD, for use in conjunction with the Schluter®-Shower System. KERDI-SHOWER-SB is waterproof and ready for tile, leaving only sealing of joints and corners to complete waterproofing.
For more information: www.schlutersystems.com
